User manual

Section 6: Chassis Component Replacement
TVC-500 Operation Manual 6-5
020-100539-01 Rev. 1 (08-2010)
Figure 6-6 Expansion Card Support Removal
6.5.2 Replacement
1. Insert the expansion card support tabs into the rear chassis slots (1 in Figure 6-7), then lower the support
until it clicks into place in the chassis (2 in Figure 6-7).
NOTICE! There should be no resistance when inserting the tabs into the chassis. If resistance is encountered,
forcing the expansion card support into place will result in damage to the support. Ensure the tabs are seated
properly before lowering the support into place.
Figure 6-7 Expansion Card Support Replacement