User manual

6-4 TVC-500 Operation Manual
020-100539-01 Rev. 1 (08-2010)
Section 6: Chassis Component Replacement
Figure 6-4 Airflow Guide Replacement
6.5 Expansion Card Support
Removal and replacement of the expansion card support is described here.
6.5.1 Removal
1. Ensure the TVC-500 controller is
powered down. Refer to Section 6.2
Powering Down the Controller.
2. Remove the side access panel (6.3.1) if
not already removed.
3. Remove the expansion card support by
lifting firmly on the handle at the green
touch point (1 in Figure 6-5) and
rotating the support upward (2 in
Figure 6-5).
4. Disengage the expansion card support
tabs from the rear chassis slots (1 in
Figure 6-6) and lift the support from
the chassis (2 in Figure 6-6).
Figure 6-5 Expansion Card Support Release