User manual

Section 6: Chassis Component Replacement
TVC-500 Operation Manual 6-3
020-100539-01 Rev. 1 (08-2010)
Figure 6-2 Airflow Guide Release
Figure 6-3 Airflow Guide Removal
6.4.2 Replacement
1. Insert the airflow guide tabs into the rear chassis slots (1 in Figure 6-4), then lower the airflow guide until
it clicks into place in the chassis (2 in Figure 6-4).
NOTICE! There should be no resistance when inserting the tabs into the chassis. If resistance is encountered,
forcing the airflow guide into place will result in damage to the guide. Ensure the tabs are seated properly
before lowering the guide into place.