User manual

6-2 TVC-500 Operation Manual
020-100539-01 Rev. 1 (08-2010)
Section 6: Chassis Component Replacement
Figure 6-1 Access Panel
6.3.2 Replacement
1. Align the bottom groove of the side access panel with the bottom edge of the chassis.
2. Rotate the side access panel toward the chassis and press firmly until the latch engages.
6.4 Airflow Guide
Removal and replacement of the chassis airflow guide is described here.
6.4.1 Removal
1. Ensure the TVC-500 controller is powered down. Refer to Section 6.2 Powering Down the Controller.
2. Remove the side access panel (6.3.1) if not already removed.
3. Remove the airflow guide by lifting firmly on the handle at the green touch point (1 in Figure 6-2) and then
rotating the airflow guide upward (2 in Figure 6-2).
4. Disengage the airflow guide tabs from the rear chassis slots (1 in Figure 6-3) and lift the airflow guide
from the chassis (2 in Figure 6-3).