User manual

3-4 TVC-500 Operation Manual
020-100539-01 Rev. 1 (08-2010)
Section 3: Connecting the Controller
The jumper setting equivalents are as follows:
• Jumper setting #1 in Figure 3-4 (all jumpers on) make this module input channels 1 and 2
• Jumper setting #2 (Least Significant Bit jumper removed) makes that module input channels 3 and 4, etc.
3.3 Connecting Display Devices/Screens for TVC-500
The controller comes standard with 1 D4C display
module and 4 Display Port to DVI Adapters
(Figure 3-5). In this configuration, the controller
can be connected to up to 4 display devices. The
controller can have up to 3 D4C modules, enabling
you to configure up to 12 display devices.
Figure 3-4 D2R2-E Jumper J6 Settings for Card Ordering
Figure 3-5 Display Port to DVI Adapters