Setup guide

Section 3: Operation
M Series Setup Guide 3-11
020-100011-06 Rev. 1 (05-2013)
NOTES: 1) You can still adjust a direct slide bar as usual if the display is turned off (see OSD or Menu
Preferences
menu) — the slide bar just won’t be visible. 2) A direct slide bar disappears if it is not used within
five seconds.
Checkboxes - Conditions are present if its adjacent checkbox
contains a checkmark. To toggle the checkbox, highlight and
press
ENTER, or highlight and use RIGHT ARROW KEY to check and
LEFT ARROW KEY to uncheck. If a checkbox is numbered, enter its
number to immediately toggle the checkbox.
Pull-down lists – To see a pull-down list of options available for a given parameter:
• Highlight the list and press
ENTER; or
• Enter the menu option number
Use the
UP ARROW KEY or DOWN ARROW KEY to navigate up and down within the list. Press ENTER to choose an
option from the list.
If you prefer to quickly scroll through a list without first pulling it down, highlight the option and use
LEFT
ARROW KEY or RIGHT ARROW KEY. Press ENTER when the desired choice appears. NOTES: 1) Press LEFT ARROW
KEY or RIGHT ARROW KEY to jump between pages in an extra long pull-down list. 2) Press EXIT while in a pull-
down list to cancel any change.
Editing Text
Activate the Edit Window: To enter or edit text, highlight the desired parameter (such as a channel name) and
press
ENTER to activate its adjacent edit window. Any previously entered text is displayed with its first
character highlighted in a square cursor, signifying that this character is ready for editing.
Navigate Within the Edit Window: Press RIGHT ARROW KEY to move the cursor forward or LEFT ARROW KEY
to move the cursor backwards as desired.
FIGURE 3-8 - ENTERING TEXT
FIGURE 3-6 EXAMPLE OF CHECKBOX
FIGURE 3-7 EXAMPLE OF PULL-DOWN LIST