User`s manual

12
38-FP0001-02
Adjusting the Screen
LCD Monitor Instructions
This LCD monitor decodes the signal from a computer automatically, and displays the
image on a screen in accordance with the preset mode. Unless a display mode has
been in preset table, the image is displayed under the similar mode in preset table. In
this case, the adjustment for this LCD monitor must be done in accordance with a
computer connected with. Please follow the OSD (On Screen Display) menu to adjust
screen settings.
Picture Menu (refer to page 18-21)
Adjustment Items for computer screen
BRIGHTNESS
‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥
Adjust the brightness for the screen
CONTRAST
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the contrast for the screen
H POSITION
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the horizontal position for the screen
V POSITION
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the vertical position for the screen
PHASE
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the phase for the screen
FREQUENCY
‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥
Adjust the horizontal width for the screen
SCALING
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Scale the screen
Note
H position, v position, phase and frequency for the screen can be adjusted in Analog
mode only.
Advanced Menu (refer to page 22-23)
COLOR
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the color temperature for the screen
USER RED
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the level of red for the screen
USER GREEN
‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥
Adjust the level of green for the screen
USER BLUE
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the level of blue for the screen
Pip(picture in picture) Menu (refer to page 24-28)
SIZE
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Select the size of pip
POSITION
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Select the position of pip
SOURCE
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Change the input signal
BRIGHTNESS
‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥
Adjust the brightness of pip
CONTRAST
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the contrast of pip
COLOR
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the color of pip
TINT
‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥‥
Adjust the tint of pip
SHARPNESS
‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥ ‥‥
Adjust the sharpness of pip
Note
BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS for pip can be adjusted
when inputting Composite Video or S-Video signal and also selecting [small] or
[medium] or [large] in [size] menu.