Product Info
Table Of Contents
- 1. Brief Introduction
- 2. Technical Specifications
- 4. Description of indicator and press-button
- 5. Definition of DB9 Socket Pin
- 6. Description of Power Supply Condition
- 7. Description of Serial Interconnection
- 8. Instructions
- 9. Configuration Tools
- 10. AT command
- 1. Test command
- 2. Set / Inquire the baud rate
- 3. Set / Inquire the serial communication mode
- 4. Set / Inquire authentication password
- 5. Set/Inquire Name
- 6. Set / Inquire Sniff power-saving mode
- 7. Set / Inquire the parameters of inquiring scan and connecting scan
- 8. Set / Inquire whether authenticate
- 9. Set / Inquire device type
- 10. Set / Inquire device role
- 11. Set / Inquire the data processing mode when not connected
- 12. Set / Inquire flow control mode
- 13. Set / Inquire the type of data device
- 14. Set / Inquire whether it is bind
- 15. Set/Inquire the memorized remoted Bluetooth device
- 16. Clear the memorized address
- 17. Inquire local Bluetooth address
- 18. Inquire software version
- 19. Software reset
- 20. Inquire remoted Bluetooth devices
- 21. Cancel inquire remoted Bluetooth devices
- 22. Restore default settings
- 23. Inquire all commands
- 11. FAQ:
- 1 After powering the module, the indicator of the Module doesn’t blink.
- 2 When there are multiple Bluetooth devices around, how to connect to the specified Bluetooth device?
- 3 How to operate if want to connect with multiply devices at the same time？
- 4 How the multipoint connections send and receive data? And what are the differences between the sending & receiving of multipoint and point-to -point connections?
- 5 Can not set the parameters, or use the Configuration Tools displaying "connection timeout" when connects to the PC
- 6 How to send AT command by your hand？
- 7 Two serial adapter can not connect with each other
- 8 Why PC, USB Dongle cannot find the serial adapter?
- 9 Why PC USB Dongle and serial adapter cannot realize data communication or only communicate by one-way data communication?
- 10 How to communicate with PDA?
- 11 How to communicate with Bluetooth mobile phone?
- 12.1 Equipment Type Number
- 12.2 MAJOR SERVICE CLASSES
- 12.3 MAJOR DEVICE CLASSES
- 12.4 THE MINOR DEVICE CLASS FIELD
- 12.5 MINOR DEVICE CLASS FIELD - COMPUTER MAJOR CLASS
- 12.6 MINOR DEVICE CLASS FIELD - PHONE MAJOR CLASS
- 12.7 MINOR DEVICE CLASS FIELD - LAN/NETWORK ACCESS POINT MAJOR CLASS
- 12.8 MINOR DEVICE CLASS FIELD - AUDIO/VIDEO MAJOR CLASS
- 12.9 MINOR DEVICE CLASS FIELD - PERIPHERAL MAJOR CLASS
- 12.10 MINOR DEVICE CLASS FIELD - IMAGING MAJOR CLASS
Chongqing Jinou Science &Technology Development Co., Ltd.
http://www.oemblue.com/ info@oemblue.com
4
1. Brief Introduction
100M Wireless RS232 Serial Adapter was design and applied to different of electronic
industrial equipment, such as rail range finder, four-wheel position indicator, air compresso
r, surveying and mapping total station and variety of flow detectors. As a cable
replacement program, it can connect the single-chip processor or processor directly via
using PnP mode to achieve the wireless data transmission among equipments transparently.
100M Wireless RS232 Serial Adapter can be divided into Master device and Slave device
which can be matched as one set. When the circuit of the100m RS232 Bluetooth Serial
Adapter hardware is connected correctly and powered up, the master and slave device will
establish a connection automatically and identify & memory each other. Then, the user's
device can use the 100M Wireless RS232 Serial Adapter as the same as using a serial
cable.100M Wireless RS232 Serial Adapter can be used independently as well, excluding
using by match. When user’s equipment equipped with a Slave100m RS232 Bluetooth
Serial Adapter, other Bluetooth devices, such as Bluetooth PDA can search out this 100M
Wireless RS232 Serial Adapter and find out the services provided, and then establish
connection and communicate with it through these services. For the communication of the
users ’equipments, 100M Wireless RS232 Serial Adapter can still be used as serial line.
100M Wireless RS232 Serial Adapter provides a safety identification function. When users
use safety identification, the equipments’ connects must be authenticated, and only the
authenticated equipment can realize communication. However, this process could be
finished automatically if it is a pair of 100M Wireless RS232 Serial Adapter. (Default
Password: 1234) Figure 1 shows that in the application of user devices A and B is a serial
cable. Figure 2 shows that in the application of the user devices A and B are 100M
Wireless RS232 Serial Adapter, and between the two devices, it is the same to users
devices and regarded as a serial line. Figure 3 shows the connection of 100M Wireless
RS232 Serial Adapter and other Bluetooth devices (here is the connection situation of the
Bluetooth PDA). Under this situation, for the user device, it is the same as the figure 1 and
figure 2.
Figure1
Us
er
De
vic
es
A
Us
er
De
vic
e
B
Serial Line