Product Info
Table Of Contents
- 1. Brief Introduction
- 2. Technical Specifications
- 4. Description of indicator and press-button
- 5. Definition of DB9 Socket Pin
- 6. Description of Power Supply Condition
- 7. Description of Serial Interconnection
- 8. Instructions
- 9. Configuration Tools
- 10. AT command
- 1. Test command
- 2. Set / Inquire the baud rate
- 3. Set / Inquire the serial communication mode
- 4. Set / Inquire authentication password
- 5. Set/Inquire Name
- 6. Set / Inquire Sniff power-saving mode
- 7. Set / Inquire the parameters of inquiring scan and connecting scan
- 8. Set / Inquire whether authenticate
- 9. Set / Inquire device type
- 10. Set / Inquire device role
- 11. Set / Inquire the data processing mode when not connected
- 12. Set / Inquire flow control mode
- 13. Set / Inquire the type of data device
- 14. Set / Inquire whether it is bind
- 15. Set/Inquire the memorized remoted Bluetooth device
- 16. Clear the memorized address
- 17. Inquire local Bluetooth address
- 18. Inquire software version
- 19. Software reset
- 20. Inquire remoted Bluetooth devices
- 21. Cancel inquire remoted Bluetooth devices
- 22. Restore default settings
- 23. Inquire all commands
- 11. FAQ:
- 1 After powering the module, the indicator of the Module doesn’t blink.
- 2 When there are multiple Bluetooth devices around, how to connect to the specified Bluetooth device?
- 3 How to operate if want to connect with multiply devices at the same time？
- 4 How the multipoint connections send and receive data? And what are the differences between the sending & receiving of multipoint and point-to -point connections?
- 5 Can not set the parameters, or use the Configuration Tools displaying "connection timeout" when connects to the PC
- 6 How to send AT command by your hand？
- 7 Two serial adapter can not connect with each other
- 8 Why PC, USB Dongle cannot find the serial adapter?
- 9 Why PC USB Dongle and serial adapter cannot realize data communication or only communicate by one-way data communication?
- 10 How to communicate with PDA?
- 11 How to communicate with Bluetooth mobile phone?
- 12.1 Equipment Type Number
- 12.2 MAJOR SERVICE CLASSES
- 12.3 MAJOR DEVICE CLASSES
- 12.4 THE MINOR DEVICE CLASS FIELD
- 12.5 MINOR DEVICE CLASS FIELD - COMPUTER MAJOR CLASS
- 12.6 MINOR DEVICE CLASS FIELD - PHONE MAJOR CLASS
- 12.7 MINOR DEVICE CLASS FIELD - LAN/NETWORK ACCESS POINT MAJOR CLASS
- 12.8 MINOR DEVICE CLASS FIELD - AUDIO/VIDEO MAJOR CLASS
- 12.9 MINOR DEVICE CLASS FIELD - PERIPHERAL MAJOR CLASS
- 12.10 MINOR DEVICE CLASS FIELD - IMAGING MAJOR CLASS
Chongqing Jinou Science &Technology Development Co., Ltd.
http://www.oemblue.com/ info@oemblue.com
15
from a device, which can be used as an alternative to RS232 cable.
Bind address
Whether you have bound the address of the other or not. Ticking means that it cannot
connect with other devices after this matching & connection, but only limit the
connection of this device. On the contrary, it is allowed to connect and match with any
other devices.
Whether to use authentication and encryption
If selected, the other device must enter a password before connecting to authentication,
and data transmission will be encrypted.
Password
Password used to authenticate. (No more than 6 characters)
9.3 Serial parameters
Baud rate
Setting data communication baud rates of the module and equipment. This baud
rate is the baud rate of the module.
Parity
Support for no parity, odd parity, even parity
Stop bit
Supports 1 stop bit, 2 stop bits
9.4 Energy-saving parameters and commands
Connection interval
The interval of each time you connect and scan, that is how often to allow the
connection. Interval time = setting value × 625us