Product Info

Chongqing Jinou Science &Technology Development Co., Ltd .
http://www.oemblue.com/ [e-mail]
7
blinks once every 3 seconds when query. When matching, it blinks quickly four times
every second; when connecting, blink once every second; after connecting, the
indicator light extinguishes.
When RS232 is working under the parameter setting condition, the master/slave indicator
light and connecting state indicator light extinguish.
Mode switch button: In data model state, press Cmd button, the two working
condition indicator light of the RS232 adapter extinguish. At this time RS232 adapter
works under the parameter setting condition and returns "+ OPEN: 0" from serial port. In
parameter setting condition, RS232 adapter stops working, and can only set the
parameter RS232 adapter. In parameter settings state, press the Cmd button and RS232
adapter exit parameter condition, and begin to work. (searching, matching,
connecting, sending data etc.); but cannot set RS232 adapter parameters. After powering,
it enters data mode state default.
Figure 4 Outside View
1. RS232 Connector
2. DC Power Connector
3. Power Indicator Light (red)
4. Mode Switch Button (CMD button)
5. Master/Slave Mode Indicator Light (red)
6. Connection Mode Indicator Light (green)
Notes:
There is no the item 5 in Class 2 type. The appearance and arrangement is the same as the
Class 1.
5. Definition of DB9 Socket Pin
Hole Pattern (Female) DB9