User's Manual
Table Of Contents
- Overview
- Parameters
- Description of Indicator Light and button
- Description of the authentication mode
- Parameter configuration
- Testing Command
- Parameter Setting Mode Indicate
- Inquire/Set Device Name
- Inquire Local Bluetooth Address
- Inquire/Set Remote Bluetooth Address
- Clear Remote Bluetooth Address
- Inquire Software Version
- Inquire/Set Device Role
- Set/Inquire Baud Rate
- Set/Inquire Flow Control Mode
- Set/Inquire Authentication Mode
- Set/Inquire Password
- Scan Around BLE Device
- Stop Scanning
- Inquire/Set Parameters of Connection-control
- Set/Inquire Scan Parameter
- Set/Inquire Broadcasting Interval
- Set/Inquire Transmit Power
- Set/Inquire BLE Data Communication Service UUID
- Set/Inquire BLE Data Communication Characteristic TXD UUID
- Default value: 0000 b351d6d8c7ecbdf0eab1bfc6bcbc
- This channel is used by the adapter to send data to the opposing BLE Bluetooth device.
- Set/Inquire BLE Data Communication Characteristic RXD UUID
- Default value: 0000 b352d6d8c7ecbdf0eab1bfc6bcbc
- This channel is used by the adapter to receive data from the other BLE Bluetooth device.
- Reset to Factory Default
- Restart the adapter
- OTA instructions
- Application examples
- Common Questions
2
IX.
Common Questions ........................................................................................................... 19
1. How to send AT command? .................................................................................................................. 19
2. How to connect the target Bluetooth device when there are multiple Bluetooth devices around? ....... 20
3. 2pcs BLE adapters can not connect. ...................................................................................................... 20
Web: www.oemblue.com ............................................................................................................................ 22