User's Manual
Table Of Contents
- Overview
- Parameters
- Description of Indicator Light and button
- Description of the authentication mode
- Parameter configuration
- Testing Command
- Parameter Setting Mode Indicate
- Inquire/Set Device Name
- Inquire Local Bluetooth Address
- Inquire/Set Remote Bluetooth Address
- Clear Remote Bluetooth Address
- Inquire Software Version
- Inquire/Set Device Role
- Set/Inquire Baud Rate
- Set/Inquire Flow Control Mode
- Set/Inquire Authentication Mode
- Set/Inquire Password
- Scan Around BLE Device
- Stop Scanning
- Inquire/Set Parameters of Connection-control
- Set/Inquire Scan Parameter
- Set/Inquire Broadcasting Interval
- Set/Inquire Transmit Power
- Set/Inquire BLE Data Communication Service UUID
- Set/Inquire BLE Data Communication Characteristic TXD UUID
- Default value: 0000 b351d6d8c7ecbdf0eab1bfc6bcbc
- This channel is used by the adapter to send data to the opposing BLE Bluetooth device.
- Set/Inquire BLE Data Communication Characteristic RXD UUID
- Default value: 0000 b352d6d8c7ecbdf0eab1bfc6bcbc
- This channel is used by the adapter to receive data from the other BLE Bluetooth device.
- Reset to Factory Default
- Restart the adapter
- OTA instructions
- Application examples
- Common Questions
13
19. Set/Inquire BLE Data Communication Service UUID
Command Answer Parameter
AT+BLESPPSERVICE=<uuid>
<CR><LF>
<CR><LF>OK<CR><LF>
<uuid>:support
128bit or 16bit UUID
AT+BLESPPSERVICE?
<CR><LF>
<CR><LF>+BLESPPSERVICE:<uuid
><CR><LF>
<CR><LF> OK<CR><LF>
20. Set/Inquire BLE Data Communication Characteristic TXD UUID
Command Answer Parameter
AT+BLECHARACTERTXD=<
uuid
><CR><LF>
<CR><LF>OK<CR><LF>
<uuid>:support
128bit or 16bit UUID
AT+BLECHARACTERTXD?
<CR><LF>
<CR><LF>+BLECHARACTERTXD:
<uuid>
<CR><LF>
<CR><LF> OK<CR><LF>
Default value: 0000 b351d6d8c7ecbdf0eab1bfc6bcbc
This channel is used by the adapter to send data to the opposing BLE Bluetooth device.
21. Set/Inquire BLE Data Communication Characteristic RXD UUID
Command Answer Parameter
AT+BLECHARACTERRXD=<u
uid
><CR><LF>
<CR><LF>OK<CR><LF>
<uuid>:support
128bit or 16bit UUID
AT+BLECHARACTERRXD?
<CR><LF>
<CR><LF>+BLECHARACTERRXD:<
uuid
><CR><LF>
<CR><LF>OK<CR><LF>
Default value: 0000 b352d6d8c7ecbdf0eab1bfc6bcbc
This channel is used by the adapter to receive data from the other BLE Bluetooth device.
22. Reset to Factory Default
Command Answer Parameter
AT+RESET<CR><LF>
<CR><LF>OK<CR><LF>
None
23. Restart the adapter
Command
Answer
Parameter
AT+RESTART<CR><LF>
<CR><LF>OK<CR><LF>
None