User's Manual

7
1. Testing Command
Command Answer Parameter
AT<CR><LF>
<CR><LF>OK<CR><LF>
None
2. Parameter Setting Mode Indicate
Command Answer Parameter
None
<CR><LF>+OPEN:<status><CR
><LF>
Status: Remote address status
0: no remote address is
configured
1: Remote address configured
If the adapt is a master device
and configure a remote
address, once powered on,
the adapter will connect the
slave device of
the address.
3. Inquire/Set Device Name
Command Answer Parameter
AT+NAME=<name><CR><LF
>
<CR><LF>OK<CR><LF>
name: Device name
Default:
BLE0405C1P
AT+NAME?<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>+NAME:<name><CR><LF
>
4. Inquire Local Bluetooth Address
Command Answer Parameter
AT+LADDR?<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>+LADDR:<bdaddr><CR><L
F>
bdaddr: Device
address
5. Inquire/Set Remote Bluetooth Address
Command Answer Parameter