User Instructions

15
/
17
successfully.. after the password is cancelled successfully, the interface
automatically jumps to the original setting interface. through Back
Exit exit to the main interface. The operation steps are shown as
below.
Modify the password
when the password has been opened(Start
Password statis is on)
Click the " " key to enter the setting information list, and select the "Pass
word " option by using " + " key or " - " key ,click " " to confirm, enter Password
in the option interface, press the " + " key or " - " key to select " Reset Password
and click
”to confirm
.
1
The interface prompts " Please input your old password”, then using +”
key or “-“key switch the number “0-9”,click " " to switch digits
.
2、 After the input is completed , the interface prompts " Please enter your
password " . At this time, using " + " key or the " - " key to switch the
number " 0 - 9 " , click "
" to switch digits.
3、 After the input is completed , the interface prompts " Please confirm your
password " . At this time, using" + " key or the " - " key to switch the
number " 0 - 9 " , click "
" to switch digits.
Note :when start Password status is off , the password defaults is“0000”.
After the password is successfully modified, the interface will automatically jump