SDS

MATERIALSAFETYDATASHEET
Chomp®PullItOut™ConcreteStainRemover
Prepared:March12,2014

Chomp®PullItOut™ Page 2 of 4
SECTION 5 – FIREFIGHTING MEASURES
Flammability: Non-flammable
Flash Point (Deg C, TCC ): None LEL: Not applicable UEL: Not applicable
Auto-ignition Temperature (deg F): N/A
Solubility in Water: Complete
Hazardous Combustion Products: Not applicable
Means of Extinction: Treat for surrounding material
Special Fire Fighting Equipment: No Special Firefighting Equipment is needed; however, self-contained breathing
apparatus and protective clothing should be worn in fighting fires involving
chemicals
SECTION 6 – ACCIDENTAL RELEASE MEASURES
Leak and Spill Procedure: Before attempting cleanup, refer to hazard data given above. Small spills may be absorbed
with non-reactive absorbent and placed in suitable, covered, labelled containers. Prevent
large spills from entering sewers or waterways. Contact emergency services and supplier for
advice.
SECTION 7 – HANDLING AND STORAGE
Storage and Handling Requirements: Keep out of reach of children
SECTION 8 - EXPOSURE CONTROL & PERSONAL PROTECTION
Protective Gloves: Rubber.
Eye Protection: Safety glasses
Respiratory Protection: Not normally required.
Other Protective Equipment: As required by employer code.
Engineering Controls: General ventilation normally adequate
SECTION 9 – PHYSICAL & CHEMICAL PROPERTIES
Physical State: Liquid Appearance & Odor: White opaque liquid
Light citrus odor.
Specific Gravity @25 C: 1.062 Vapor Density (Air = 1) Not Available
Evaporation Rate: Not Available Boiling Point (deg F): Not Available
pH (as supplied): 10.0-11.0 Vapor Pressure: Not Available
Viscosity: Thickened slurry Solubility in Water: Complete
SECTION 10 – STABILITY & REACTIVITY
Conditions for Chemical Instability: Stable.
Incompatible Materials: None known.
Reactivity, and Under What Conditions: Not available.