User Manual
5
Accessories list
No.
Accessories name
Quantity
1
Mainframe
1
2
Adapter
1
3
Battery charge clip
1
4
Manual
1
5
Product Qualification Certificate
1
Function instruction
DC discharge
1. Press and hold the "DC start switch" for 3 seconds to turn on or off DC, and the ON icon
of DC on the power LED screen will be on, then all DC output ports can be used
normally, and the current power used will be displayed on the display screen.
2. QC3.0 18 W/Type-C 65 W can charge devices supporting fast charge.
3. Wireless charge: after the DC power is turned on, the mobile phone or device with
wireless charge function will be charged automatically when it is placed on the icon, and
the current power used will be displayed on the display screen.
4. Illuminating lamp: after turning on the DC power supply, click the DC key to turn on the
illuminating lamp. (Briefly press once to turn on the lamp for a long time, twice to flash,
three times to send rescue the signal, and one more press to turn off the lamp)
5. Car battery charge: after turning on the DC power supply, insert one end of the
equipped alligator clip connecting wire into the 13.8 V interface of the machine, clamp the
red alligator clip on the positive pole of the battery and the black alligator clip on the
negative pole of the battery. (Note: reverse connection of positive and negative poles will
damage the machine)
This function can only be used for charging, and it is forbidden to use it
directly for ignition.