User Manual

7
Light button:
1. Short press once to turn on the LED, short press the LIGHT button in turn, the LED
light sequence: full bright – SOS – flashing LED – off.
2. SOS distress signal: 3 shorts 3 long 3 short: 200ms on, 200ms off, 200ms on,
200ms off, 200ms on, 800ms off, 600ms on, 400ms off, 600ms on, 400ms off,
600ms on, 800ms off, 200ms on, 200ms on, 200ms off, 200ms on, 200ms off,
cycle.
3. Blink signal: 200ms on, 200ms off.
4. LED open state, long press the LIGHT button (≥ 1 second) directly turn off the LED.
Power display
1. When the power indicator shows 0% to 19%, the power indicator bar from the first
frame upward increases and cycle upward.
2. When the power indicator shows, 20% to 39%, the first frame of the power
indicator is always on, and the second frame is incrementally cycled upward.
3. When the power indicator shows 40% to 59%, the first two cells of the power
indicator are always on, and the third cell is cycled upward.
4. When the power indicator shows 80% to 99%, the first 1,2,3,4 cells of the battery
indicator are always on, the fifth cell flashes in 0.5S.
5. When 100% of the battery is charged, the power indicator is always on in cells
1,2,3,4 and 5, and sleep after 10s.
Instructions for use
How to turn on the machine and check the power?
Short press any key to turn on the machine, open the relevant output port, the machine
displays the current power. Note: The first time you use or long-term non-use, if any keys
do not work, please inert the charger charging start, and then try again.
How to charge?
DC charging: Please plug the adapter into the DC input port, the LCD screen will
automatically turn on to indicate the current charging power. At the same time, the
battery indicator “ ” will flash and turn on. When charging is complete (battery is 100%),
the LCD screen will automatically turn off. If you use the optional car charger, the solar
panel needs to be equipped with a DC5521 adapter. The charging voltage range is 13-30V,
and the maximum charging power of DC port is 80W.
How to use AC output function?
Short press AC button to power on, “ ” icon brighten, indicating that the device is
ready for power supply.
Rated AC output power: 300W (600W peak)
Caution:
1. Please keep AC switch off when not using AC function.
2. When the output is overloaded or short-circuited, the indicator will flash and
beeping alarm.
How to use the car output and DC output?
Short press the DC button to turn on/off the cigarette lighter port and DC output function,
the cigarette lighter port icon “ ” and the DC icon “ ” on the screen will light up