Technical data

CHLORIDE Active
UPS from 700 VA to 3000 VA
MKA4CAT0UKAG4/Rev. 1-07/2008
06
6. CONTROL PANEL
6.2 Panel with LCD (optional)
Active offers (as an option, focused on
advanced users) a multiple language
LCD display for complete UPS
monitoring and control. The text is
available in English, French, German,
Italian, Portuguese and Spanish.
Complete access to LCD menu is
possible through navigation push
buttons located below the screen. The
LCD panel may be rotated to fit
horizontal and vertical mounting. It
contains all actions available through
LED panel and includes additional
options. A brief summary is shown
below:
Menus
PANEL WITH LCD
Control Menu
Status Menu
Setup Menu
Logging
About
Advanced Options
Actions
Enable/disable acoustic alarm and run battery tests.
It shows UPS status, including input/output parameters
It allows the user to select the language and the output voltage
It contains a historic log with the most relevant events
Information about UPS model and rating
For settings that may require advanced configuration of the UPS and operation. It is password
protected. Most actions are taken through this menu: output frequency selection, turn UPS
to bypass (Eco or Line Mode), settings and levels for controllable outlets, cold start, low
battery alarm selection, auto-restart function and other actions specified in the user manual
(please check for details).
7. REAR SIDE
The following figures show different rear packs. 7. Input circuit breaker
sides for Active depending on the housing
Legend:
and power ratings.
1. Communication slot 8. Input power socket (16A)
2. Fan 9. Not controllable output sockets (10A)
All models include RS232 and USB (HID)
3. Fan (In other models, only one fan) 10. Fixing point for sliding rail
communication ports, providing the user
4. External battery pack connector 11. Controllable outlets (2 groups,10A)
more flexibility in order to obtain
5. RJ11 port for battery pack detection 12. 16A output socket
information regarding monitoring.
13. ROO/RPO terminals
cable
14. USB port
6. RS232 port (DB9)
There are two controllable outlet groups.
By using them, the user can maximize the
energy usage and prioritize different loads
according to their relevance.
RPO/ROO terminals are very useful to
shutdown / shutdown and restart the unit
remotely, for example when it is difficult
to have access to the UPS.
To connect the battery extension to the
UPS, the battery cable must be plugged
into the socket and into one battery pack
connector. Besides, this the RJ11 cable
must connect the UPS and the battery
pack for auto detection of external battery
Active 3000 RT
Fault LED
Bypass Mode/Eco
mode LED
Mains LED
ESC Button
Inverter LED
inverter ON/PFF
Button
Enter Button
Scroll Down
Button