User`s guide

APPENDIX A: CONFIGURING MANAGEUPS VIA SERIAL PORT
ASCII Terminal
You will need an ASCII terminal or terminal emulation program on your PC
workstation.
HyperTerminal is a standard terminal emulation program offered with
Windows. See
Terminal Settings on the following page for instructions on how
to set up Hyper Terminal to work with ManageUPS.
Serial Connection
Connect a serial port on your PC to the
ManageUPS serial configuration port as
described in the
Supplemental Installation
Note
appropriate for your UPS.
The ManageUPS serial configuration port will
be either the UPS communications port on
internal adapters or the DB9 port marked
TERM on external adapters.
Location of serial ports on external
adapter.
Open a Terminal
Session
If your terminal settings are correct, you should see the following dialog in your
terminal window after you power up ManageUPS (Entries are case -sensitive)
Type:
CONSOLE and press [ENTER]
Type:
admin for both username and password