User`s guide

Configuring the Environment Sensor

Environment Sensor 913-623 @Rev A Section VII, page

Output Relay Settings – Help Detail Entries

Name:

A user configurable name given to the output relay.

(These values are the

ouputName objects in the Chloride Power Environment

Sensor MIB)

URL:

A url associated with this device. Must be in the format

'http://hostname'. When this value is set the output name becomes a

link on the environment status page.

(These values are the

outputUrl objects in the Chloride Power Environment

Sensor MIB)

Delay:

This setting determines the number of seconds the

Energize Relay When

conditions must be present before the relay is energized.

Hold:

The number of seconds the relay will be held in the energized state after the

Delay

time has expired. If the Energize Relay When conditions are corrected

before this time is up the relay will de-energize.

An entry of ‘0’ in this field will cause the relay to remain energized for as long as

the event condition(s) that trigger the relay remain active.

Energize Relay When:

Configure the relay to energize when any or all of the selected conditions are

present. Multiple conditions can be selected using the Ctrl key and clicking on

entries in the list box. If no conditions are selected the output relay is disabled.