User`s guide

Configuring the Environment Sensor
page, Section VII 913-623 @Rev A Environment Sensor
6
Input Device Settings – Help Detail Entries
Name (1-3):
A user configurable name given to the input device.
(These values are the
inputName1, inputName2, inputName3
objects in the Chloride Power Environment Sensor MIB)
Normal State (1-3)
The normal state of the input contact. When the input contact is not in this state
the input fault condition is generated..
(These values are the
inputNormalState1, inputNormalState2,
inputNormalState3
objects in the Chloride Power Environment Sensor MIB)
URL (1-3)
A url associated with this device. Must be in the format
'http://hostname'. When this value is set the input name becomes a link
on the environment status page.
(These values are the
inputUrl1, inputUrl2, inputUrl3
objects in the Chloride Power Environment Sensor MIB)
Event Severity (1-3)
This setting determines the severity level of a fault condition on the input. If this
setting is
Disabled then no condition will be generated and the status will
always be
Normal.
(These values are the inputFaultSeverity1,
inputFaultSeverity2, inputFaultSeverity3
objects in the Chloride Power Environment Sensor MIB)