User`s guide

SECTION V: DEVICE SETTINGS
Device Settings 913-623 @Rev A Section V, page
7
About UPS
This dialog area
displays identity
and nominal
ratings of the UPS.
For UPS that do
not communicate
identity and
nominal ratings
information, the
form controls in
the
Ratings and
Identity
area allow
the user to set this
information in the
ManageUPS
adapter manually.
The first time the
web interface is
accessed,
ManageUPS may
prompt you to
confirm ups
identity and
ratings
information that
the UPS does not
communicate to
ManageUPS
.
Model:
The model number of the UPS unit.
Serial Number:
The serial number of the UPS unit.
Firmware Version:
The version number of the firmware in the UPS.
Capacity:
The maximum power output of the UPS. Capacity is measured in VA and Watts. The VA
measurement is the maximum power available to drive devices with switched-mode power
supplies such as computers. The Watts measurement is the maximum power available to
drive resistive loads such as lighting or devices with motors.