User`s guide

ECTION V:

DEVICE SETTINGS

Device Settings 913-623 @Rev A Section V, page

OVERVIEW OF

DEVICE

SETTINGS

The Device menus provide a view of current status and

access to dialogs for Diagnostics, Control and

Configuration.

Battery Status:

States are

Normal

Charging

Discharging

This value is returned as the

object:

UpsBatteryStatus

the UPS MIB - RFC1628.

Battery Charge Remaining:

Status

Current percentage of the

remaining total battery

charge.

This value is returned as the

object

upsBatteryChargeRemaining

in the UPS MIB - RFC1628.

Battery Voltage:

Voltage measured at the battery or charger output. This may be reported as "string" voltage

or "cell" voltage depending on the UPS model. This value is returned as the

upsBatteryVoltage

object in the UPS MIB - RFC1628

Internal Temperature:

The internal temperature reported by the UPS. This value is returned as the

upsBatteryTemperature

object in the UPS MIB - RFC1628.

Est. Battery Life:

Sometimes referred to as

Estimated Autonomy.

This is an estimate of the amount of

time the UPS batteries can sustain the current load. This value is continuously

recalculated based on the operating conditions of the UPS. When the UPS is on

battery, this value may decrease faster than expected due to battery age and other

variables that are difficult to model in the calculation algorhythm. (This value is

returned as the object;

upsBatteryEstimatedMinutesRemaining in the UPS MIB -

RFC1628)