Specifications

Safety Notices
Site Planning for ftServer V 2302, V 4304, and V 6308 Systems 1-9
WARNING
!
Disconnect the power cords from the server or power
source before you install or relocate the equipment.
All voltage is removed only when the power cords are
disconnected.
WARNING
!
Do not install or store the equipment in an unsuitable
place. Install or store the equipment in a place that
meets the requirements specified in this guide. Avoid
the following conditions to avoid the risk of fire.
•Dust
• High humidity, such as a place near a boiler
• Direct sunlight
• Instability, such as places not stabilized against earthquakes
WARNING
!
Do not use or store this product in a corrosive
environment.
Avoid using or storing this product in an environment
which may contain corrosive gases. Such gases
include, but are not limited to, sulfur dioxide,
hydrogen sulfide, nitrogen dioxide, chlorine,
ammonia or ozone.
Avoid installing this product in a dusty environment
or one that may contain corrosive materials such as
sodium chloride or sulfur.
Avoid installing this product in an environment which
may contain excessive metal flakes or conductive
particles in the air.
Such environments may cause corrosion or short
circuits within this product, resulting in not only
damage to this product, but also fire.
If there are any concerns regarding the environment
at the planned site of installation or storage, please