Specifications

Safety Notices
1-8 Stratus ftServer V 2302, V 4304, and V 6308 Systems: Site Planning Guide (R624)
WARNING
!
The system uses two power cords to provide
redundant sources of power. To fully remove power
from a system, disconnect both power cords. To
reduce the risk that electrical shock could injure a
person or damage the system, exercise caution when
working in the unit even when only one power cord is
connected.
WARNING
!
To prevent a cabinet from tipping over and injuring a
person or damaging the system, start installing
systems from the bottom of the cabinet upward.
WARNING
!
If you replace the modem cable supplied by Stratus,
use a cable with a gauge of at least 26 AWG to prevent
fire.
WARNING
!
To avoid fire, electric shock, and equipment
breakdown, prevent water or foreign objects from
getting into the equipment. Do not let water or foreign
objects, such as pins or paper clips, enter the
equipment.
WARNING
!
To prevent fire or current leakage, do not plug the
power cord into a nonconforming outlet. Use a power
outlet with appropriate voltage and power type, as
specified in this guide.
WARNING
!
Do not install the equipment where you may need an
extension cord. Use of an extension cord that does
not meet the power specifications introduces a risk of
overheating that could lead to a fire.