Specifications

Preface
x Stratus ftServer V 2302, V 4304, and V 6308 Systems: Site Planning Guide (R624)
• By email to [e-mail]. If it is possible, please include specific
information about the documentation on which you are commenting:
– For a printed document or a document in PDF format, include the title and part
number from the Notice page and the page numbers.
– For online documentation, include the Help subject and topic title.
If you are connected to an OpenVOS system, you can comment on this document by
using the command comment_on_manual. To use the comment_on_manual
command, your system must be connected to the RSN.
The comment_on_manual command is documented in the document OpenVOS
System Administration: Administering and Customizing a System (R281) and the
OpenVOS Commands Reference Manual (R098). There are two ways you can use this
command to send your comments.
• If your comments are brief, type comment_on_manual, press <Enter> or <Return>, and
complete the data-entry form that appears on your screen. When you have
completed the form, press <Enter>.
• If your comments are lengthy, save them in a file before you issue the command.
Type comment_on_manual followed by -form, then press <Enter> or <Return>. Enter
this document’s part number, R624, then enter the name of your comments file in
the -comments_path field. Press the key that performs the CYCLE function to
change the value of -use_form to no and then press <Enter>.
NOTE
If comment_on_manual does not accept the part number
of this document (which may occur if the document is not
yet registered in the manual_info.table file), you can
use the mail request of the maint_request command
to send your comments.
Your comments (along with your name) are sent to Stratus over the RSN.
This information will assist Stratus Information Development in making any needed
changes to the ftServer system documentation. Your assistance is most appreciated.
Regulatory Notice
Appendix C, “Standards Compliance” provides all regulatory notices.