Specifications

Preface ix
Preface
The Stratus ftServer V 100, V 200, and V 400 Systems: Site Planning Guide (R543)
describes how to prepare a site for the installation of a Stratus ftServer V 100, V 200,
or V 400 system. It provides the specifications for cabinets, peripheral devices, and
communications cables, as well as grid pages and templates for site-layout planning.
This manual is intended for those responsible for preparing their site for the installation
of a Stratus ftServer V 100, V 200, or V 400 system.
Manual Version
This manual is a revision. This revision incorporates new information about the RSN
Internet console server throughout.
Manual Organization
This manual contains four chapters and three appendixes.
Chapter 1 introduces site planning for ftServer V 100, V 200, and V 400 systems and
provides a site planning checklist.
Chapter 2 describes electrical power requirements, provides worksheets to help you
determine the specific needs for your configuration, and describes the power cords that
Stratus supplies.
Chapter 3 describes the environmental and space requirements of the room where the
system will be installed.
Chapter 4 describes the communications cables that are required.
Appendix A lists the specifications of ftServer V 100, V 200, and V 400 systems.
Appendix B provides electrical circuit and wiring information you may need to provide
to the contractor and/or facilities personnel responsible for wiring the AC power at the
system installation site.
Appendix C lists the electronic interference, immunity, safety, and noise level
standards with which the systems comply.
Related Manuals
Refer to the following Stratus manuals for related documentation.