Specifications

PDU Specifications
System Specifications A-9
PDU Specifications
PDUs distribute AC power to the system’s components from an AC power source.
The following sections describe the PDUs for ftServer V 200 and V 400 systems and
ftServer V 100 systems.
 ‘‘AAP41105V PDUs for V 200 and V 400 Systems’’ on page A-9
 ‘‘AAP41104V PDU for V 100 Systems’’ on page A-11
AAP41105V PDUs for V 200 and V 400 Systems
Figure A-5 illustrates the AAP41105V PDU for V 200 and V 400 systems. Table A-4
lists PDU marketing IDs, power cord lengths, and connector types.
Figure A-5. AAP41105V PDU
Table A-4. AAP41105V PDU Part Numbers, Power Cords, and Connectors
Location Marketing ID
Input Power Cord
Length
Input Power Cord
Connector Type
United States AAP41105V 12 ft. (3.65m) L6-30P
International AAP41150V-I 12 ft. (3.65m) IEC 309
†
† Your qualified electrician must remove the plug and hardwire the PDU power cord to
the power output terminals on the SYP8K12RMI or SYP12K12RMI UPS units in
compliance with local and national electrical codes.
Japan AAP41150V-J 12 ft. (3.65m) L6-30P
pdu41150