Specifications

Cables for External Components
Communications Line Planning 4-9
V 400 Systems: Operation and Maintenance Guide (R557) or the Stratus
ftServer V 100 Systems: Operation and Maintenance Guide (R581) for connection
details.
Connecting the AA-E96600 RSN Dialup Console Server
The AA-E96600 RSN dialup console server connects to the module and the RSN
modem as follows:
 Ethernet port:
– If a maintenance network with U772 Ethernet switches is present in the
system, connect the RSN console server to a U772 Ethernet switch.
– If no U772 Ethernet switches are present but a network I/O enclosure is
present, connect the RSN console server to a U764 PICMG 2.16 switch in the
network I/O enclosure.
– If neither U772 Ethernet switches nor a network I/O enclosure are present in
the system, connect the RSN console server to a U575V or U577 PCI adapter.
 P2 serial port:
Connect the P2 serial port to the ftServer system’s COM1 port.
 P1 serial port:
Connect the P1 serial port to the RSN modem.
See the Stratus ftServer Systems Peripherals Site Planning Guide (R582) for the
locations of the P1, P2, and Ethernet ports. See the Stratus ftServer V 200 and V 400
Systems: Operation and Maintenance Guide (R557) or the Stratus ftServer V 100
Systems: Operation and Maintenance Guide (R581) for connection details.
Cables for External Components
Table 4-4 lists the cables used to connect ftServer V 100, V 200, and V 400 systems
to external components and specifies the source of the cable (supplied by Stratus or
which you must provide). If they are supplied by Stratus, the table lists the marketing
ID and length of the cable.