Specifications

Power Cord Summary

2-10 Stratus ftServer V 100, V 200, and V 400 Systems: Site Planning Guide (R543)

Contact APC at http://www.apcc.com for specifications, documentation, and ordering

information for qualified APC Symmetra models for ftServer V 100 systems.

AC Power Connections to Qualified UPS Models for V 100 Systems

AC input power cords must be hardwired to the qualified UPS models. Table 2-9 lists

how the ftServer system PDU AC input cords connect to qualified UPS models.

WARNINGWARNING

A qualified electrician must supply and hardwire the

AC input cord, and, if required, an AC output cord,

distribution panel, or conduit to each UPS unit in

compliance with local and national electrical codes.

Power Cord Summary

Table 2-10 describes where you can find more information about PDU, UPS, and

Legacy E124 expansion storage-system cabinet power cords.

† For V 100 systems with up to two CPU enclosures, two fully populated core I/O

enclosures, two fully populated D910 FC disk enclosures, a network I/O enclosure and a

AA-T53300 single tape-drive enclosure.

Table 2-9. UPS to PDU AC Power Cords for V 100 Systems

UPS Model UPS to PDU Power Cord

Chloride - LT081XAT-0H8SX Use two B50155-45M cords to connect the A-side and B-side PDUs