Specifications

Selecting a UPS Unit for ftServer V 100 Systems
AC Power Planning 2-9
Selecting a UPS Unit for ftServer V 100 Systems
Stratus does not sell or service UPS units. You must purchase them directly from the
UPS vendor. However, Stratus has qualified UPS models for use with ftServer V 100
systems.
Each cabinet uses two UPS units: one to supply power to the A-side power distribution
system and one for the B-side.
See Table 2-8 to select a qualified Chloride UPS model for your ftServer V 100 system.
For UPS specifications, documentation, and ordering information, see Chloride Power
Protection at http://www.chlorideups.com.
See Table 2-8 to select an APC Symmetra
®
UPS model for an ftServer V 100 system.
Table 2-7. Qualified Chloride UPS Models for ftServer V 100 Systems
Region or
Country ftServer System Configuration
UPS Quantity, Model
Number, and Options
Power Output
of One UPS
(Watts)
North and
South
America
ftServer system Two LT081XAT-0H8SX 4760
ftServer system with network I/O
enclosure
Two LT081XAT-0H8SX and
two LPBP610-2 batteries
(one for each UPS)
4760
International ftServer system Two LT081XIT-0E3ZX 4760
ftServer system with network I/O
enclosure
Two LT081XIT-0E3ZX and
two LPBP610-2 batteries
(one for each UPS)
4760
Japan ftServer system Two LT081XJT-0E0SX 4760
ftServer system with network I/O
enclosure
Two LT081XJT-0E0SX and
two LPBP610-2 batteries
(one for each UPS)
4760
Table 2-8. Qualified APC Symmetra Models for ftServer V 100 Systems
Region or Country UPS Quantity and Model
Number
†
UPS Power Output (Watts)
North and South America Two SYH4K6RMT 2800, expandable to 4200
International Two SYH4K6RMI 2800, expandable to 4200
Japan Two SYH4K6RMJ 2800, expandable to 4200