Specifications

Selecting a UPS Unit for ftServer V 200 and V 400 Systems
AC Power Planning 2-7
WARNINGWARNING
!
A qualified electrician must supply and hardwire the
UPS AC input cord, and if required an AC output cord,
distribution panel, or conduit to each UPS unit in
compliance with local and national electrical codes.
AC input power cords must be hardwired to the qualified UPS models. Table 2-5 lists
how the ftServer V Series system PDUs and the E124 storage-system cabinet power
cords connect to the qualified APC UPS models.
WARNINGWARNING
!
A qualified electrician must supply and hardwire the
UPS AC input cord, and if required an AC output cord,
distribution panel, or conduit to each UPS unit in
compliance with local and national electrical codes.
Table 2-5. AC Power Cords for Chloride UPS Models -ftServer V 200 and V 400 Systems
UPS Model UPS to PDU Power Connection
Chloride - LT081XAT-0H8SX The A-side and B-side PDU AC input cords plug
into L6-30R receptacles on the A-side and B-side
UPS units, respectively.
Chloride - LT081XIT-0E3ZX The A-side and B-side PDU AC input cords plug
into IEC60309 receptacles on the A-side and
B-side UPS units, respectively.
Chloride - LT081XJT-0H0SX The A-side and B-side PDU AC input cords plug
into L6-30R receptacles on the A-side and B-side
UPS units, respectively.
Table 2-6. AC Power Cords for APC UPS Models - ftServer V 200 and V 400 Systems (Page 1 of 2)
APC Model UPS to PDU Power Connection E124 Storage-System Cabinet
SYA8K16RMP
(with SYPD3
backplate kit)
The A-side and B-side PDU AC input
cords plug into L6-30R receptacles on
the A-side and B-side UPS units
respectively.
N/A