Specifications

Preface
xii Stratus ftServer V 100, V 200, and V 400 Systems: Site Planning Guide (R543)
Ordering Manuals
You can order manuals in the following ways.
 If your system is connected to the Remote Service Network (RSN
™
), issue the
maint_request command at the system prompt. Complete the on-screen form
with all of the information necessary to process your manual order.
 Customers in North America can call the Stratus Customer Assistance Center
(CAC) at [phone] or [phone], 24 hours a day, 7 days a week. All
other customers can contact their nearest Stratus sales office, CAC office, or
distributor; see http://www.stratus.com/support/cac/index.htm for
CAC phone numbers outside the U.S.
Manual orders will be forwarded to Order Administration.
Commenting on This Manual
You can comment on this manual by using the command comment_on_manual. To
use the comment_on_manual command, your system must be connected to the RSN.
Alternatively, you can email comments on this manual to [e-mail].
The comment_on_manual command is documented in the manual OpenVOS System
Administration: Administering and Customizing a System (R281) and the OpenVOS
Commands Reference Manual (R098). There are two ways you can use this command
to send your comments.
 If your comments are brief, type comment_on_manual, press <Enter> or <Return>, and
complete the data-entry form that appears on your screen. When you have
completed the form, press <Enter>.
 If your comments are lengthy, save them in a file before you issue the command.
Type comment_on_manual followed by -form, then press <Enter> or <Return>. Enter
this manual’s part number, R543, then enter the name of your comments file in the
-comments_path field. Press the key that performs the CYCLE function to change
the value of -use_form to no and then press <Enter>.
NOTE
If comment_on_manual does not accept the part number
of this manual (which may occur if the manual is not yet
registered in the manual_info.table file), you can use
the mail request of the maint_request command to
send your comments.
Your comments (along with your name) are sent to Stratus over the RSN.
Stratus welcomes any corrections and suggestions for improving this manual.