Technical data

6.2 SNMP Adapter.
Cool Power units have an SNMP management hardware option called ManageUPS. This innovative
device enables us to communicate and monitor the status of the UPS through the network with an
SNMP/Telnet management program.
It also includes a Web Browser which enables us to monitor through an Internet browser (Internet
Explorer, Netscape). By adding the MopUPS software, we are able to do an orderly shutdown of the
operating system.
6.3 Cable 59
This enables us to manage the equipment’s basic signals (low battery, network failure) and to initiate
the shutdown of the operating systems included with the UPS service (NT, Linux, Novel S.X y OS/2)
without interrupting the RS232 communication.
6.4 Cable 61
This option enables us to have the basic network failure and low battery signals free from potential
without interrupting the RS232 communication. The following operating systems are commonly used:
AS400, RISC 6000 and NT. This cable must include the adapter cord for each operating system. E.g.:
Cable 61 plus AS400 A cables.
Cable 61 includes an interfaces with jumpers to modify the logic of the contacts.
It leaves the factory with positive logic in all basic signals.
22
945012.066REV: 16/03/01
Operating Manual
1 – Low battery
2 - R X D
3 - T X D
4 – Remote Shutdown
5 - GND
8 – Mains failure
5
4
3
2
1
9
8
7
6
Mains
failure
Low
Battery
Input
Output