Technical data

2 Unpacking the Unit and Contents.
Upon receipt of the unit and prior to unpacking it, make sure that there are no visible signs of dama-
ge on the outside of the box. If any damage is observed, notify the carrier.
Also observe the date of the last recharge which is located on the side of the box (see Figure “A”). Not
the reception date of the equipment and recharge the battery once the equipment has been unpac-
ked.
Figure A.
2.1 Unpacking the Cool Power
The procedure for unpacking the unit is described below:
10
945012.066REV: 16/03/01
Operating Manual
1.- There should be a clean, obstacle-free
surface available for unpacking the
equipment.
2.- Open the box, remove the documen-
tation and cables (manual, power
cords and communication cables).