Installation manual

Iris Touch 400 Range Dialer Installation Manual8
6. Post installation
If a fault should develop, then the LED light on the top of the unit will start
flashing and the display will show a system fault message.
This message can be touched to gain access to more information.
7. PIN alarms
The IRIS Touch series have PIN inputs [7] that can be used to generate alarm
messages. These can be:
• Text messages via SMS (GSM / Ethernet & GPRS only).
• SIA alarm messages over IP to the Monitoring Centre (Ethernet /
Ethernet & GPRS only).
• Fast Format alarm messages over IP to the Monitoring Centre
(Ethernet / Ethernet & GPRS only).
The messages for each PIN can be configured via the Settings Menu on the
touch screen display. See Appendix A for more details.