Installation manual
IRIS Touch 400 Range Dialler Installation Manual V1.4
12
7.2. Default alarm messages
The default SIA messages for each PIN are shown below:
Pin
‘Set’ message
‘Restore’ message
Meaning
1
NBA01
NBR01
Burglary alarm/restore
2
NFA02
NFR02
Fire alarm/restore
3
NQA03
NQR03
Emergency alarm/restore
4
NOP04
NCL04
Open/close
5
NPA05
NPR05
Panic alarm/restore
6
NUA06
NUR06
User defined alarm/restore
7
NAT07
NAR07
Power fail/restore
8
NTA08
NTR08
Tamper/restore
9
NBA09
NBR09
Burglary alarm/restore
10
NFA10
NFR10
Fire alarm/restore
11
NQA11
NQR11
Emergency alarm/restore
12
NOP12
NCL12
Open/close
13
NPA13
NPR13
Panic alarm/restore
14
NUA14
NUR14
User defined alarm/restore
15
NAT15
NAR15
Power fail/restore
16
NTA16
NTR16
Tamper/restore
8. Relay outputs
The IRIS dialler has two relay outputs [9] that can be used in a number of ways:
To indicate communications path failure.
Activation by incoming SMS message.
Setting by the monitoring centre.
The relay contacts are normally open and closed when activated.
Wire to these contacts as required and define how they are to be used using the
configuration options on the Settings Menu. See Appendix A for more details.