BOTTOM MOUNT REFRIGERATOR USER MANUAL MODEL CBM283NW CBM282NBS CBM281NSS CBM280NB Customer Service 1300 796 688 www.chiq.com.
IMPORTANT SAFETY INSTRUCTIONS WARNING 1. Read these instructions. 2. Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5. Do not use your refrigerator near water. 6. Clean only with a damp cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
WARNING Electric Shock Hazard Failure to follow these instructions can result in electric shock, fire, or death. 1.WARNING–Keep ventilation openings, in both your refrigerator and the built-in structure, clear of obstruction. 2.WARNING–Do not touch the interior of your refrigerator with wet hands. This could result in frostbite. 3.WARNING–Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. 4.
Preparations for use Installation location 1. Ventilation condition The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not locate the refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus guaranteeing the refrigeration effect while saving energy consumption. Do not locate the refrigerator in the damp place, so as to prevent the refrigerator from rusting and leaking electricity.
Using your refrigerator Setting the fridge temperature When the refrigerator system is powered on for the first time, all icons on the display panel gets illuminated for 2s. 1. Functions 1.1 Temperature setting COLD 1 When the user does not need a colder temperature. 2 3 When in normal use. 4 COLDEST 5 When the user needs a colder temperature. Temperature can be adjusted by pressing the ‘SET’ key.
The fridge thermostat and the air regulating rod should be used in combination. When the refrigerator is used under ambient temperature higher than 35℃, do not set it at Mode 5 on the temperature control panel, and meanwhile, adjust the air regulating rod to the right side of the middle position. In this way, the normal operation of the fridge compartment will not be affected.
power recovery. 1.5 Power-on delay In order to protect the refrigerator compressor from being damaged in the case of short-time power failure (i.e., less than 5 minutes), the compressor will not be started immediately after it is powered on. 1.6 Fault alarm When the indicator light of Mode 1 or Mode 3 or Mode 5 keeps flashing, it indicates the refrigerator fault. Please contact the after-sales personnel for visiting service as soon as possible.
2.Check the temperature of the frozen food cabinet in the shop where you buy the frozen foods. 3.Make sure the frozen food package is in perfect condition. 4.Always buy frozen products last on your shopping trip or visit to the supermarket. 5.Try to keep frozen food together whilst shopping and on the journey home, as this will help to keep the food cooler. 6.Don't buy frozen food unless you can freeze it straight away. Special insulated bags can be bought from most supermarkets and hardware shops.
stop its use, so as not to affect the service life. Defrosting This appliance is designed with automatic defrosting function, thus no need to defrost it manually. Changing the lamp The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case of any abnormality, please contact the after-sales personnel for visiting service. The lamps can only be replaced by the manufacturer, together with a part of the appliance.
no pipe damage on the back of the equipment before handling. Up-to-date information on the options for disposing of old equipment and packaging from old equipment can be obtained from the local municipal office. Reversing the door 1. Make sure that your refrigerator is unplugged. 2. Pry the hinge cover up and off, remove the screws that secure the upper hinge to the door, then remove the hinge. 3. Remove the refrigerator compartment door from the cabinet. 4. Remove the screws that secure the center hinge.
16. Install the refrigerator compartment door. 17. Remove the door bushing hole cover on the top left side of the refrigerator compartment door, then move the door bushing from the top right of the door to the top left of the door. Install the hole cover in the bushing hole on the top right of the door. 19. Secure the upper hinge to the top left side of the cabinet with the screws you removed previously.
Customer Service 1300 796 688 www.chiq.com.au c Changhong Electric (Australia) P/L all rights reserved.
