User's Manual

ChipSiP CWFC10x Serial
Downlink Speed (Kbps). The speed must be
entered if Manual Uplink Speed is selected.
Address Type: Default is IP. Another option is
based on MAC
Local IP Address: Enter a range of IP address if IP
is selected in the Address Type
MAC Address: Enter a MAC address of each
client that connect to CWFC103 if MAC is selected
in the Address Type
Mode: Guaranteed minimum bandwidth
Uplink Bandwidth (Kbps): Guarantee has a
minimum uplink bandwidth for the clients
Downlink Bandwidth (Kbps): Guarantee has a
minimum downlink bandwidth for the clients
Apply Changes: Click on this icon after all the
options are fill up
Reset: Click the Reset button to abort change and
recover to the previous configuration setting.
Delete Selected: Click to delete the selected clients
that will be access right removed from CWFC103.
Delete All: Click to delete all the registered clients
from the access allowed list.
6.2 Routing
This page is used to setup dynamic routing protocol or
edit static route entry.