User's Manual

ChipSiP CWFC10x Serial
5.3 MAC Filtering
Entries in this table are used to restrict certain types of
data packets from your local network to Internet through the
CWFC103. Use such filters can be helpful in securing or
restricting your local network.
Enable MAC Filtering: Default is uncheck,
Disable. If the option is enabled, than the MAC
Entries in the table will be restricted to access the
network.
MAC Address: To restrict data transmission from
the local network on certain MAC addresses, fill in
the MAC address, also put your comments on it.
Comments: Comments let you know about whys
to restrict data from the ports.