User's Manual

ChipSiP CWFC10x Serial
IP Address: If you select the L2TP support on WAN
interface, fill in the IP address for it.
Subnet Mask: If you select the L2TP support on WAN
interface, fill in the subnet mask for it.
Gateway: If you select the Static L2TP support on
WAN interface, fill in the gateway for WAN interface
out going data packets.
Server IP Address: Enter the IP address of the L2TP
Server.
User Name: If you select the PPTP support on WAN
interface, fill in the user name and password to login the
PPTP server.
Password: If you select the PPTP support on WAN
interface, fill in the user name and password to login the
PPTP server.
MTU Size: Fill in the mtu size of MTU Size. The
default value is 1500
Attain DNS Automatically: Click to select getting
DNS address automatically.
Set DNS Manually: Click to select getting DNS
address for Static IP support.
DNS 1: Fill in the IP address of Domain Name Server
1.
DNS 2: Fill in the IP address of Domain Name Server
2.
DNS 3: Fill in the IP address of Domain Name Server
3.
Clone MAC Address: Fill in the MAC address that is
the MAC address to be cloned.
Enable uPNP: Click the checkbox to enable uPNP
function.
Enable IGMP Proxy: Click the checkbox to enable
IGMP Proxy.