User's Manual

ChipSiP CWFC10x Serial
2.
DNS 3: Fill in the IP address of Domain Name Server
3.
Clone MAC Address: Fill in the MAC address that is
the MAC address to be cloned.
Enable uPNP: Click the checkbox to enable uPNP
function.
Enable IGMP Proxy: Click the checkbox to enable
IGMP Proxy.
Enable Ping Access on WAN: Click the checkbox to
enable WAN ICMP response.
Enable Web Server Access on WAN: Click the
checkbox to enable web configuration from WAN side.
Enable FTP Server Access on WAN: Click the
checkbox to enable FTP Server Access on WAN
Enable IPsec pass through on VPN connection:
Click the checkbox to enable IPSec packet pass through
Enable PPTP pass through on VPN connection:
Click the checkbox to enable PPTP packet pass through
Enable L2TP pass through on VPN connection:
Click the checkbox to enable L2TP packet pass through
Apply Changes: Click the Apply Changes button to
complete the new configuration setting.
Reset: Click the Reset button to abort change and
recover the previous configuration setting.
4.2.5 L2TP