User's Manual

ChipSiP CWFC10x Serial
PPTP: PPTP Allow user to make a tunnel with remote
site directly to secure the data transmission among the
connection. User can use embedded PPTP client
supported by this router to make a VPN connection.
Enable Dynamic Mode: Click to select PPTP
Dynamic support on WAN interface for IP address
assigned automatically from a PPTP server.
IP Address: If you select the PPTP support on WAN
interface, fill in the IP address for it.
Subnet Mask: If you select the PPTP support on WAN
interface, fill in the subnet mask for it.
Gateway: If you select the Static PPTP support on
WAN interface, fill in the gateway for WAN interface
out going data packets.
Server IP Address: Enter the IP address of the PPTP
Server.
Server Domain Name: Assign Domain Name and
dispatch to PPTP servers. It is optional field.
User Name: If you select the PPTP support on WAN
interface, fill in the user name and password to login the
PPTP server.
Password: If you select the PPTP support on WAN
interface, fill in the user name and password to login the
PPTP server.
MTU Size: Fill in the mtu size of MTU Size. The
default value is 1500
Attain DNS Automatically: Click to select getting
DNS address automatically.
Set DNS Manually: Click to select getting DNS
address for Static IP support.
DNS 1: Fill in the IP address of Domain Name Server
1.
DNS 2: Fill in the IP address of Domain Name Server