User's Manual

ChipSiP CWFC10x Serial
interface, fill in the user name and password to login the
PPPoE server.
Password: If you select the PPPoE support on WAN
interface, fill in the user name and password to login the
PPPoE server.
Service Name: Fill in the service name of Service
Name. The default value is empty.
Connection Type: Select the connection type from
pull-down menu. There are Continuous, Connect on
Demand and Manual three types to select.
Idle Time: If you select the PPPoE and Connect on
Demand connection type, fill in the idle time for
auto-disconnect function. Value can be between 1 and
1000 minutes.
Host Name: Fill in the host name of Host Name. The
default value is empty
MTU Size: Fill in the mtu size of MTU Size. The
default value is 1500
Attain DNS Automatically: Click to select getting
DNS address automatically.
Set DNS Manually: Click to select getting DNS
address for Static IP support.
DNS 1: Fill in the IP address of Domain Name Server
1.
DNS 2: Fill in the IP address of Domain Name Server
2.
DNS 3: Fill in the IP address of Domain Name Server
3.
Clone MAC Address: Fill in the MAC address that is
the MAC address to be cloned.
Enable uPNP: Click the checkbox to enable uPNP
function.
Enable IGMP Proxy: Click the checkbox to enable