User's Manual

ChipSiP CWFC10x Serial
Peer connection.
SSID: Service Set Identifier is an unique name of the
CWFC103 in the wireless network. Wireless client to
connect to the wireless network using SSID.
Channel Width: Default is 20/40MHz. The channel
bandwidth is to improve the wireless performance.
40MHz can be selected for 11b/g and 11n client.
20/40Mhz is recommended for 11n network to improve
the throughput.
Channel Number: Default is Auto. The effective
channel from 1 to 13/Auto of the wireless network.
3.2.2 Wireless Advance Settings
Broadcast SSID: Default is Enable. The device’s
SSID is visible to wireless clients.
WMM: Default is Enabled. It will enhance the
multimedia data transfer performance.
Data Rate: Default is Auto. CWFC103 will negotiate
will wireless client for best performance.
3.2.2 Advance Wireless Settings
THESE SETTINGS ARE ONLY FOR MORE
TECHNICALLY ADVANCED USERS WHO HAVE A
SUFFICIENT KNOWLEDGE ABOUT WIRELESS LAN.
IMPROPER SETTING MAY CAUSE CWFC103 DOES
NOT FUNCTION.