User's Manual

ChipSiP CWFC10x Serial
Channel Smart select
Security Off
3.2 Configure CWFC103
1. Connect the Ethernet cable to the CWFC103 LAN
port and your notebook/computer.
2. Power up to CWFC103.
3. Open Internet Explorer from your
notebook/computer
4. Enter: http://10.10.1.1
5. Enter the Username and Password. If this is the
first time use, than enter “admin” and “admin” on
both username and password.
6. The following screen will show up and follow the
instruction
3.2.1 Basic Settings
This page is used to configure the basic parameters for
the wireless LAN.