Operating instructions

2
1
3
4
6
E
5
6
7
8
Attach the Front & Rear Wheels
4WD
Turn over the vehicle body.
1. Slide the driving wheel onto the rear axle from Left Side. And keep the driving wheel match
with the gear box.
2. Slide the Ø12 washer onto the rear axle.
3. Tighten a lock nut onto the rear axle with a spanner.
Repeat for the other driving wheel.
4. Fit the wheel cover to the wheel.
5. Slide the driving wheel onto the front axle. And keep the driving wheel match with the gear
box.
6. Slide the Ø12 washer onto the front axle.
7. Tighten a lock nut to the end of the front axle with a spanner.
8. Fit the wheel cover to the wheel.
Repeat for the other driving wheel.
Rear axle
Front axle
IMPORTANT(only for 4WD TYPE):
If you want to move the vehicle by the push
hand located on rear vehicle, always unplug
the BLUE connector under the hood, to
avoid damage the front gear boxes!
BLUE connector