User's Manual

Default resolution of the LCD (Liquid Crystal Display) in the factory can be found in the appendix,
and the most ideal graphic quality can be adjusted to. Users can also adjust the graphics according
to the following operation.
four indicating symbols and corresponding press keys and a LCD lamp
can be found in the display panel. The specific functions of these symbols and press keys are listed
in the following table:
2
6
5
4
3
1
Display OSD menu or enter sub-menu
On/off screen power
Indicator cursor movement or the gradual decrease of OSD
manual selection or contrast adjustment
Indicator cursor movement or the gradual increase of OSD
manual selection or contrast adjustment
Automatically adjust pixel clock, phase, horizontal and
vertical position and others or quit from the menu.
Green or blue or white -normal action
Orange (yellow) or red or flash-Power Management (that is,
DPMS mode: reduce the power consumption to 2W when
horizontal or vertical synchronous signal is not received.)
H.F:55.5K
V.F:60Hz1280x720
How to use on screen display(OSD)
3
" "
Operating procedure
1.Press" "Push key to display the OSD menu.
2.Press" "Or" "Push key to select the main menu entry.
3.Press " "Push key to select sub entry.
4.Press" "Or" "Push key to adjust.
5.Press " "Push key to exit from the present menu after ending the
adjustment.