User's Manual

IX. Pls go back to the webpage opened at Step3 above and click “Next” to start the
registration procedure by entering the registration code. Once the registration has been
completed, the following message will be displayed on the frame (time to be taken for
the frame to display this message will vary depends on different connection
environment and usually it takes no more than 2 min):
When this message pops up, your eStarling photo frame has been fully configured and
ready for use.
X. If the eStarling frame cannot be connected to the specified WiFi network, the following
message will be displayed after you see the eStarling logo (after ~1 min you powered up
the frame from the above step). Pls verify the WiFi network settings and go through the
setup procedure again.