User's Manual

- For WEP encrypted network, enter the WEP encryption key and choose the encryption
mode (choose none for open network).
- For WPA encrypted network, enter the WPA Pre-Shared Key (PSK) and the encryption
key type (if you are not sure, try TKIP first as this is the most common type)
Click “Next” when completed.
VI. A summary of the WiFi network setting will be displayed on the left hand side. Please go
through the setup procedure again if there is any error or click the “Configure Frame”
button to send the configuration information to the eStarling frame. (the configuration
data will be stored inside the config.sys file from the “system” folder of the eStarling
frame.
**************************************************************************************
(Re. : click on “Advance setting” if you need to specify your own IP address settings.
Click “OK” when you have finished the IP address settings. It is not recommended to
setup the IP address settings manually unless you are familiar with your WiFi network).